top of page

NEW AT ALPINE!

VarDAR Post Cooling

Additional Cooling Unit

Applications:

   - Plants with limited roof height

   - When blocking of the film limits total output

   - For tacky Films

   - Cools film bubble by approx. 10-12°C

   - Variable Diameter Cooling Arms Adjust to specific bubble diameters

VarDAR_edited_edited.jpg

The SELECT Extruder

Helical Grooved Barrel with Screw to match

   - Much Higher Output per RPM

   - Lower Power Demand (-20%)

   - Low Shear, Low Torque, Very Low Wear

   - Much Lower Melt Temperatures

     …and Controllable

Lower Temperatures means better Bubble stability & Higher Overall Throughput

Less Sensitive to Pellet Geometry, Bulk Density, and Fluff

Picture15.jpg

AKHN Haul-Off / Nip

One of 6 Different Oscillating Haul-Off Versions

Lighter than the ATR & ATRL

Options: S-Wrap, 2-Roll Annealing, 4-Roll Annealing

Picture17_edited.png

Auto Knife Positioning

Auto Knife Positioning & Width Detection

   - Guard opposite blades protects operator

   - Blades automatically retract

   - Assembly automatically moves back for threading winder

   - Blades can Oscillate to prolong life

Blades are Positioned Automatically

Edge Detection: Blades track edge and move automatically to keep trim and split during job changes

Alti-1.jpg

The SINGLE INLET V-Ring

Single-Inlet Air-Ring

Cleaner Install

   Maintenance & Operator Friendly

Lower Pressure Drop

   More air, more output

Insulated Internally Protected from Abrasion

Picture16.jpg

NEW HW.D Winder

Hybrid Winder Best of Turret & Flat Bed

Soft Controllable Lay-On

NO Pre-Winding

Forward & Reverse Wind

59" Diameter Rolls

Picture4.png
AHKN & WD 3000
bottom of page